| No. | DESCRIPTION |
| 1 | AUTOMATIC BOTTLE MACHINE LFGD-4（including 1 set mould) |
| 2 | LOW-PRESSURE SCREW AIR COMPRESSOR 3.0/12 |
| 3 | COMPRESSOR DE AR DE ALTA PRESSÃO 2.4/30 |
| 4 | HIGH PRESSURE AIR DRYER 6.8/30 |
| 5 | AIR FILTER 6.8/30 |
| 6 | LOW-PRESSURE AIR DRYER 3.8/10 |
| 7 | AIR FILTER 3.8/30 |
| 8 | RESERVATÓRIO DE AR DE ALTA PRESSÃO C-1.0/30 |
| 9 | LOW-PRESSURE AIR TANK C-1.0/13 |
| 10 | REFRIGERADOR NTS-5P |
| 11 | 200ML 28MM ALASKA NECK MOULD |
| 12 | 500ML 28MM ALASKA NECK MOULD |
| 13 | 1000ML 28MM ALASKA NECK MOULD |
- Water bottles 500 CC theory output bottle line configuration table
| 产品规格 | Especificação | Unidade | LFGD-4 |
| 模穴数 | N.º de cavidades | Cav. | 4 |
| 瓶子间距 | Passo da cavidade | mm | 80 |
| 瓶子最大容量 | Capacidade máxima | ml | 1500 |
| 加热间距 | Passo de aquecimento | mm | 38 |
| 坯头数 | Suporte da pré-forma | peças | 126 |
| 瓶口直径 | Pescoço da pré-forma (diâmetro interior) | mm | <30 |
| 最大瓶坯高度 | Altura da pré-forma (máx.) | mm | 100 |
| 最大瓶身内径 | Diâmetro da garrafa (máx.) | mm | 72 |
| 最大瓶身高度 | Altura da garrafa (máx.) | mm | 260 |
| 加热箱数量 | Fornos de aquecimento | unidade | 4 |
| 灯管数量 | Lâmpadas de infravermelhos | peças | 24 |
| 机器使用功率 | Potência máxima de aquecimento | kw | <35 |
| 装机功率 | Consumo de energia especificado | kw | 240 |
| 电压 | Tensão | V | 380V(50/60Hz) |
| 外形尺寸 | Tamanho | mm | 5800X1800X2.6 |
| 稳定产量 | Produção teórica 500ml(18g) | garrafa redonda | 9000BPH(1 SET) |
- Configuração das peças principais
| Nome do produto | Origem | Marca |
| Interruptor magnético | Taiwan | KITA |
| PLC | Wuxi | XINJE |
| Clamp cylinder | Japan | SMC |
| Ecrã tátil | Wuxi | XINJE |
| Air blow valve | Taiwan | Airtac |
| Servo | Wuxi | XINJE |
| Muffler | Japan | SMC |
| Fonte de alimentação comutada | Taiwan | Delta |
| Gearbox | Taiwan | Wage |
| Contactor CA | França | Schneider |
| Blowing inspection | South Korean | Autónica |
| Válvula de ação | Japan | SMC |
| Filtro | Japan | SMC |
| Cilindro | Japan | SMC |
| Calha de fixação | Taiwan | PHI |
| Gas storage tank | Jiangsu | Yueli |
| Reduction valve | Japan | SMC |
| Heating system | Taiwan | Delta |
- high-efficient preform supply system
Fully automatic preform-unscrambled and preform-loading structure, which not only achieves
faster and more efficient preform-unscrambled and preform-loading but also improves the stability
of the whole machine running process. There is a sensor installed in the preform down-track, when
the preform track lacks preform, the preform will be delivered into the preform-unscrambled system
from the hopper automatically. The one-way preform-inserted design can solve the preform-blocked and preform abrasion problem.
- Servo preform-divided system
The preform is divided by equidistance by the servo motor. The stroke and speed of the servo motor
are easily adjusted through the HMI. All complicated processes are done by digitization, safe, fast,
and accurate. Compared with the traditional server-ways preform-divided, cylinder type preform-divided,
etc, the servo motor control one-way preform-divided, speed is faster and position is more accurate.
- Intelligent heating system
The preform is heated by infrared lamps which makes the preform stretch more equably and hig her
transparency. With the help of imported reflective mirror aluminum plates, the heat energy of lamps
is taken full advantage of; heating time is shorter; lower power consumption and improving production
capacity. The temperature of each lamp of every layer can be adjusted up and down, forward and
backward individuality according to different preforms. An intelligent ventilation system keeps the
oven temperature inside constantly.
- Servo mold-clamping system
The mold-clamping system is driven by a servo motor and mechanical connecting rods. The molds and bottom mold are clamped
synchronously through the servo motor. High-pressure mold-locked by the h-pressure pressurized plates behind the mold framework
which can reduce the visibility of the bottle clamping line effectively and ensure the bottle quality. Drawer type mold structure design,
easy mold exchange, a skillful engineer can finish the mold exchange in half an hour.
- HMI operation system
Our blow molders are highly intelligent and easy to operate. Chinese- English language color touch screen, with perfect monitoring
sense setting, troubleshooting display, auto calculating report, memory store, etc. function. You can control the machine production
situation all the time.
- Standardize spare parts and quality electric components
Most of our spare parts meet the international production standard. The standard parts are produced
in bulk in our CNC machining center and put into use after strict inspection by our QC department.
These high-quality Standardized parts ensure the stability and reliability of our machines and reduce
the maintenance cost. Our motors, PLC, cylinder, solenoid valves, electric parts blowing valves,
etc key components are quality in China and internationally famous brands.
You also can visit our YouTube channel for videos:
6 cavity automatic bottle stretch machine PARTS (3)
